Message 04300 [Homepage] [Navigation]
Thread: oxdeT04300 Message: 1/13 L0 [In index]
[First in Thread] [Last in Thread] [Date Next] [Date Prev]
[Next in Thread] [Prev in Thread] [Next Thread] [Prev Thread]

[ox] Freie Energie & Freie Information



Hallo, das liest sich wirklich weihnachtlich: wär' interessant wenn jemand
diesen Geschichten ein wenig nachgehen könnte...;-)

Franz


Global Village News and Resources
Monday, December 10, 2001 
http://www.savesite.net/gvnr/articles/121001_3.html
---------------------------------------------------

Countdown To Free Energy Speeds Up 

Earth - In the late 1880's, trade journals in the electrical sciences were
predicting "free electricity" in the near future. Incredible discoveries
about the nature of electricity were becoming common place. 

Nikola Tesla was demonstrating "wireless lighting" and other wonders
associated with high frequency currents.

There was an excitement about the future like never before. Within 20
years, there would be automobiles, airplanes, movies, recorded music,
telephones, radio, and practical cameras. The Victorian Age was giving way
to something totally new. For the first time in history, common people
were encouraged to envision a utopian future, filled with abundant modern
transportation and communication, as well as jobs, housing and food for
everyone. Disease would be conquered, and so would poverty. Life was
getting better, and this  time, everyone was going to get "a piece of the
pie." So, what happened? 

In the midst of this technological explosion, where did the energy
breakthroughs go? Was all of this excitement about "free electricity",
which happened just before the beginning of the last century, just wishful
thinking that "real science" eventually disproved? 

 The answer to that question is NO. In fact, the opposite is true.
Spectacular energy technologies were developed right along with the other
breakthroughs. Since that time, multiple methods for producing vast
amounts of energy at extremely low cost have been developed. Most of these
technologies have not made it to the "open" consumer market as an article
of commerce, however. But this is about to change 

Many inventors have begun to publish their work, instead of patenting it
and keeping it secret. More and  more, people are "giving away"
information on these technologies in books, videos and websites. While  
there is still a great deal of useless information about free energy on
the Internet, the availability of good  information is rising rapidly.
Below is a short list of "free energy" technologies that are proven beyond
all reasonable doubt. The common feature connecting all of these
discoveries, is that they use a small amount  of one form of energy to
control or release a large amount of a different kind of energy. Many of
them tap the underlying ether in some way; a source of energy conveniently
ignored by "modern" science. 

1.Radiant Energy.

Nikola Tesla's Magnifying Transmitter,
 T. Henry Moray's Radiant Energy Device, 
Edwin Gray's EMA Motor,
and Paul Baumann's Testatika Machine all run on Radiant Energy. 

This natural energy form can be gathered directly from the environment
(mistakenly called "static" electricity) or extracted from ordinary
electricity by the method called "fractionation." Radiant Energy
canperform the same wonders as ordinary electricity, at less than 1% of
the cost. It does not behave exactly like electricity, however, which has
contributed to the scientific community'smisunderstanding of it. The
Methernitha Community in Switzerland currently has 5 or 6 working models
of fueless, self-running devices that tap this energy. 


2.Permanent Magnets.

Dr. Robert Adams (NZ) has developed astounding designs of electric motors,
generators and heaters  that run on permanent magnets. One such device
draws 100 watts of electricity from the source,generates 100 watts to
recharge the source, and produces over 140 BTU's of heat in two minutes!
                    
Dr. Tom Bearden (USA) has two working models of a permanent magnet powered
electricaltransformer. It uses a 6-watt electrical input to control the
path of a magnetic field coming out of a permanent magnet. By channeling
the magnetic field, first to one output coil and then a second output
coil, and by doing this repeatedly and rapidly in a "Ping-Pong" fashion,
the device canproduce a 96-watt electrical output with no moving parts.

Bearden calls his device a Motionless Electromagnetic Generator, or MEG.
Jean-Louis Naudin has duplicated Bearden's device in France. The
principles for this type of device were first disclosed by Frank
Richardson (USA) in 1978. Troy Reed (USA) has working models of a special
magnetized fan that heats up as it spins. It takes exactly the same amount
of energy to spin the fan whether it is generating heat or not. Beyond
these developments, multiple inventors have identified working mechanisms
that produce motor torque from permanent magnets alone. 

3.Mechanical Heaters.

There are two classes of machines that transform a small amount of
mechanical energy into a large  amount of heat. The best of these purely
mechanical designs are the rotating cylinder systems designed by Frenette
(USA) and Perkins (USA). In these machines, one cylinder is rotated within
 another cylinder with about an eighth of an inch of clearance between
them. The space between the cylinders is filled with a liquid such as
water or oil, and it is this "working fluid" that heats up as the inner
cylinder spins. Another method uses magnets mounted on a wheel to produce
large eddy
currents in a plate of aluminium, causing the aluminium to heat up
rapidly. These magnetic heaters
have been demonstrated by Muller (Canada), Adams (NZ) and Reed (USA). All
of these systems can
produce ten times more heat than standard methods using the same energy
input. 

4. Super-Efficient Electrolysis.

 Water can be broken into Hydrogen and Oxygen using electricity. Standard
chemistry books claim that this process requires more energy than can be
recovered when the gases are recombined. This is true only under the worst
case scenario. When water is hit with its own molecular resonant
frequency, using a system developed by Stan Meyers (USA) and again
recently by Xogen Power,Inc., it collapses into Hydrogen and Oxygen gas
with very little electrical input. Also, using differentelectrolytes
(additives that make the water conduct electricity better) changes the
efficiency of the process dramatically. It is also known that certain
geometric structures and surface textures workbetter than others do. The
implication is that unlimited amounts of Hydrogen fuel can be made to
drive engines (like in your car) for the cost of water. Even more amazing
is the fact that a specialmetal alloy was patented by Freedman (USA) in
1957 that spontaneously breaks water intoHydrogen and Oxygen with no
outside electrical input and without causing any chemical changes in the
metal itself. This means that this special metal alloy can make Hydrogen
from water for free, forever. 

5.Implosion/Vortex.

 All major industrial engines use the release of heat to cause expansion
and pressure to produce work, like in your car engine. Nature uses the
opposite process of cooling to cause suction and vacuum to produce work,
like in a tornado. Viktor Schauberger (Austria) was the first to build
working models of Implosion Engines in the 1930's and 1940's. Since that
time, Callum Coats has published extensively on Schauberger's work in his
book Living Energies and subsequently, a number of researchers have built
working models of Implosion Turbine Engines. These are fueless engines
that produce mechanical work from energy accessed from a vacuum. There are
also much  simpler designs that use vortex motions to tap a combination of
gravity and centrifugal force to  produce a continuous motion in fluids. 

6.Cold Fusion.

 In March 1989, two Chemists from Brigham Young University in Utah (USA)
announced that they had produced atomic fusion reactions in a simple
tabletop device. The claims were "debunked"  within 6 months and the
public lost interest. Nevertheless, Cold Fusion is very real. Not only has
excess heat production been repeatedly documented, but also low energy
atomic element transmutation has been catalogued, involving dozens of
different reactions! This technology definitely can produce low cost
energy and scores of other important industrial processes. 

7.Solar Assisted Heat Pumps.

The refrigerator in your kitchen is the only "free energy machine" you
currently own. It's an  electrically operated heat pump. It uses one
amount of energy (electricity) to move three amounts of energy (heat).
This gives it a "co-efficient of performance" (COP) of about 3. 

Your refrigerator uses one amount of electricity to pump three amounts of
heat from the inside of the refrigerator to the outside of the
refrigerator. This is its typical use, but it is the worst possible way to
use the  technology. Here's why. A heat pump pumps heat from the "source"
of heat to the "sink" or place that absorbs the heat. The "source" of heat
should obviously be HOT and the "sink" for heat should obviously be COLD
for this process to work the best. In your refrigerator, it's exactly the
opposite. The "source" of heat is inside the box, which is COLD, and the
"sink" for heat is the room temperature air of your kitchen, which is
warmer than the source. This is why the COP remains low for your kitchen
refrigerator. But this is not true for all heat pumps. COP's of 8 to 10
are easily  attained with solar assisted heat pumps. In such a device, a
heat pump draws heat from a solar collector and dumps the heat into a
large underground absorber, which remains at 55° F, and mechanical energy
is extracted in the transfer. This process is equivalent to a steam engine
that extracts mechanical energy between the boiler and the condenser,
except that it uses a fluid that "boils" at a much lower temperature than
water. One such system that was tested in the 1970's produced 350 hp,
measured on a Dynamometer, in a specially designed engine from just
100-sq. ft. of solar collector. (This is NOT the system promoted by Dennis
Lee.) The amount of energy it took
 to run the compressor (input) was less than 20 hp, so this system
produced more than 17 times more energy than it took to keep it going! It
could power a small neighborhood from the roof of a hot tub  gazebo, using
exactly the same technology that keeps the food cold in your kitchen.
Currently, there  is an industrial scale heat pump system just north of
Kona, Hawaii that generates electricity from temperature differences in
ocean water. 

(Condensed from an article by By Peter Lindemann, D.Sc. 
The full version is available at:
 http://www.escribe.com/science/keelynet/m10192.html) 

LIST OF RESOURCES:

 Books:
 * Living Energies by Callum Coats
* The Free Energy Secrets of Cold Electricity by Peter Lindemann, D.Sc.
* Applied Modern 20th Century Aether Science by Dr. Robert Adams
* Physics Without Einstein by Dr. Harold Aspden
* Secrets of Cold War Technology by Gerry Vassilatos

 Websites:

http://www2.murray.net.au/users/egel/content1.htm
    developed by Geoff Egel in Australia. Best free-energy site on the net!
http://www.free-energy.cc/
    developed by Clear Tech, Inc. and Dr. Peter Lindemann
http://jnaudin.free.fr/
    developed by JLN Labs in France
http://www.1dove.com/fe/index.html
   Jim's Free Energy Page in the USA
http://www.keelynet.com/
    developed by Jerry Decker in the USA
http://www.xogen.com
    site for super electrolysis technology
http://www.rumormillnews.com
    excellent site for all kinds of alternative news, with many links


Patents: (most can be viewed at http://www.delphion.com/ )
 This list is nothing more than a sample of
 inventions that produce free energy. 

++++++++++++

http://www.savesite.net/gvnr/articles/121001_3.html

Global Village News & Resources<
Issue 28 - December 10, 2001

The Global Village News & Resources is published twice 
a month by Network 2012 in cooperation with the Savesite 
Network</a>. For more information, go to:
http://www.n2012.com/gvn/index.htm
The Global Village News & Resources and other projects of
 Network 2012 are made possible by your tax-deductible 
donations. Contributions may be sent to PO Box 18909,
 Asheville, NC. 28814, USA.  For information about contributing 
via credit card, pay pal or bank transfers, contact Michael 
Lightweaver at lightweave aol.com



________________________________
Web-Site: http://www.oekonux.de/
Organisation: projekt oekonux.de


[English translation]
Thread: oxdeT04300 Message: 1/13 L0 [In index]
Message 04300 [Homepage] [Navigation]